We have always claimed that our Hyperseal is an excellent coating for Vinyl wrapped cars. Here we have photographed a recent job that was on a late 2000’s BMW 740il that has had a metal flaked matte vinyl wrapping for approximately 6 years.
First inspection of the wrap showed that bird droppings had left their permanent mark on the horizontal surfaces and that the Suns UV rays had dried out the same surfaces. The metal flakes were very dull and the surface looked 1 dimensional.
There were several large scratch marks on the Boot/Trunk lid possibly from shopping bags or boxes being dragged on or off but other than that the wrap adhesion was as good as ever.
The restoration plan.
The plan was to restore the wrap to look unified in it’s appearance and the original Metallic flake Matte look.
First we washed the car with Mega Gloss Wash to clean the surface well
Using a waffle pad and an orbital buffing machine on low speed applied Hyperseal to the horizontal services and hand applied Hyperseal after misting all the panels with water to the vertical surfaces and left to settle for 30 minutes.
Using the same pad and machine on midrange speed we buffed the excess Hyperseal.
The Bonnet/Hood and Boot/Trunk took some work. The dryness was worse than it first seemed so it took 3 coats of Hyperseal & polishing process to get the look and feel of a newly wrapped car in all it’s glory.
The owner was beyond happy with the result and so were we.
The end result.
End
Copyright ©2018 Nano DG Singapore Pte. Ltd. All Rights Reserved